- WEDGE ANCHORS
- NYLON HAMMER ANCHOR
- DROP IN ANCHORS
- NYLON NAIL ANCHOR
- SLEEVE ANCHOR LONG HOL
- ZINC ALLOY HAMMER DRIV
- SLEEVE ANCHOR ROUND HO
- TAM ANCHOR
- SLEEVE ANCHOR ABC ：1.N
- HIT ANCHOR
- SLEEVE ANCHOR ABC： 1.H
- TWO SHIELD ANCHOR
- CHEMICAL ANCHOR STUD
- THREE SHIELD ANCHOR
- PJ ANCHOR
- FOUR SHIELD ANCHOR
- HEAVY DUTY RODS AND HE
- CEILING ANCHOR
- BOLT ANCHOR
- TOGGLE WING
Products
-
Product name: ZINC ALLOY HAMMER DRIVE ANCHOR
Hits: 2927 Category: ZINC ALLOY HAMMER DRIVE ANCHOR Model:
Product details
1.MADE BY ZINC ALLOY.
2.NAIL MADE BY CARBON STEEL.
3.EASY TO USE AND QUICK APPLICATION,BY HAMMERING THE NAIL IT CREATE FULL EXPANSION INTO CONCRETE.
| ZINC ALLOY HAMMER DRIVE ANCHOR |
CODE NO | SIZE | DIAMETER ANCHOR Фmm | ANCHOR LENGTH mm | MAXIMAL FAST THICKNESS (mm) | MIN HOLE DEPTH mm | DIAMETER HOLE Фmm | ANCHOR WEIGHT KGS/1000PCS | PACKING BOX/CARTON |
| ZA/HD-1 | M5X22 | 5 | 22 | 3 | 27 | 6 | 5 | 300/3000 |
| ZA/HD-2 | M6X25 | 6 | 25 | 5 | 30 | 7 | 7.5 | 250/2500 |
| ZA/HD-3 | M6X30 | 6 | 30 | 5 | 35 | 7 | 8 | 25/2500 |
| ZA/HD-4 | M6X40 | 6 | 40 | 15 | 45 | 7 | 10.5 | 20/2000 |
| ZA/HD-5 | M6X50 | 6 | 50 | 25 | 55 | 7 | 13 | 150/1500 |
| ZA/HD-6 | M6X65 | 6 | 65 | 35 | 70 | 7 | 16 | 100/1000 |
| ZA/HD-7 | M6X75 | 6 | 75 | 45 | 80 | 7 | 19.3 | 100/1000 |
| PULL OUT LOAD SPECIFICATION |
SIZE mm | DIAMETER ANCHOR Ф mm |
| M5 | 5 |
| M6 | 6 |
| M8 | 8 |
| M10 | 10 |
| INSTALLATION OF PULL OUT LOAD |
| 1. 5 pcs Anchor for Testing. 2. Drill a hole. 3. Measure hole depth. 4. Clean the hole, prepare Anchor. 5. Put the Anchor into the hole. 6. By hammering to make the Anchor Expand. 7. Installed Pull out Load Machine. 8. Start to Pull out the Anchor. |
Copyright © 2015 Ningbo ABC Fasteners Co.,Ltd All Rights Reserved Design by Hozest
NINGBO ABC FASTENERS CO., LTD
Website:www.abc-fasteners.com