- WEDGE ANCHORS
- NYLON HAMMER ANCHOR
- DROP IN ANCHORS
- NYLON NAIL ANCHOR
- SLEEVE ANCHOR LONG HOL
- ZINC ALLOY HAMMER DRIV
- SLEEVE ANCHOR ROUND HO
- TAM ANCHOR
- SLEEVE ANCHOR ABC ：1.N
- HIT ANCHOR
- SLEEVE ANCHOR ABC： 1.H
- TWO SHIELD ANCHOR
- CHEMICAL ANCHOR STUD
- THREE SHIELD ANCHOR
- PJ ANCHOR
- FOUR SHIELD ANCHOR
- HEAVY DUTY RODS AND HE
- CEILING ANCHOR
- BOLT ANCHOR
- TOGGLE WING
Products
-
Product name: SLEEVE ANCHOR ROUND HOLE
Hits: 7620 Category: SLEEVE ANCHOR ROUND HOLE Model:
Product details
SLEEVE ANCHOR ROUND HOLE TYPE ( PLATING THICKNESS 3-5 um )
TYPE RH | CODE NO | SIZE | THREAD | MAXIMAL FAST THICKNESS (mm) | DIAMETER SLEEVE Фmm | DIAMETER HOLE Фmm | MIN HOLE DEPTH mm | ANCHOR WEIGHT KGS/1000PCS | PACKING BOX/CTN | TYPE |
HB | HBRH-68-45 | M6x45 | M6 | 3 | 8 | 8 | 43 | 17.46 | 100/1000 | FHIH FHPH FHIHP FHPHP |
| HBRH-68-60 | M6x60 | M6 | 13 | 8 | 8 | 43 | 22.40 | 100/1000 | ||
| HBRH-69-45 | M6x45 | M6 | 23 | 9 | 9 | 43 | 19.90 | 100/1000 | ||
| HBRH-69-60 | M6x60 | M6 | 43 | 9 | 9 | 43 | 23.40 | 100/1000 | ||
| HBRH-810-60 | M8x60 | M8 | 60 | 10 | 10 | 55 | 38.90 | 120/600 | ||
| HBRH-810-80 | M8x80 | M8 | 5 | 10 | 10 | 55 | 48.60 | 100/500 | ||
| HBRH-811-60 | M8x60 | M8 | 15 | 11 | 11 | 55 | 39.80 | 120/600 | ||
| HBRH-811-80 | M8x80 | M8 | 30 | 11 | 11 | 55 | 48.70 | 100/500 | ||
| HBRH-1012-70 | M10x70 | M10 | 35 | 12 | 12 | 70 | 66.30 | 70/350 | ||
| HBRH-1012-100 | M10x100 | M10 | 55 | 12 | 12 | 70 | 88.50 | 50/250 | ||
| HBRH-1014-70 | M10x70 | M10 | 75 | 14 | 14 | 70 | 68.70 | 70/350 | ||
| HBRH-1014-100 | M10x100 | M10 | 15 | 14 | 14 | 70 | 90.90 | 50/250 | ||
| HBRH-1216-80 | M12x80 | M12 | 20 | 16 | 16 | 80 | 115.90 | 40/200 | ||
| HBRH-1216-110 | M12x110 | M12 | 36 | 16 | 16 | 80 | 151.20 | 30/150 | ||
| HBRH-1620-110 | M16x110 | M16 | 15 | 20 | 20 | 90 | 291.00 | 15/75 |
| PULL OUT LOAD SPECIFICATION |
SIZE mm | MATERIALSIZE Фmm | TORGUE WRENCH Nm | TENSILESTRENGTH σь (Mpa) | SHEAR STRENGTH τb (Mpa) | SAFETYPULL OUT LOAD KGS |
| M5 | 4.32 | 6 | 595 | 376 | 680 |
| M6 | 5.13 | 12 | 588 | 381 | 850 |
| M8 | 6.91 | 25 | 579 | 377 | 1000 |
| M10 | 8.75 | 45 | 592 | 367 | 1500 |
| M12 | 10.56 | 70 | 563 | 363 | 2200 |
| M16 | 14.36 | 130 | 544 | 366 | 3200 |
| INSTALLATION OF PULL OUT LOAD |
| 1. 5 pcs Anchor for Testing. 2. Drill a hole. 3. Measure hole depth. 4. Clean the hole, prepare Anchor. 5. Put the Anchor in the hole by Hammering. 6. Using Torque Wrench to fast the Anchor ( Nm ). 7. Installed Pull out Load Machine. 8. Start to Pull out the Anchor. 9. See the Pull out Load Strength when the concrete is Broken. 10.The concrete will Broken when the Anchor is Pull out. |
| FINAL TEST REPORT OF PULL OUT LOAD |
|  | ||||||||||||||||||||||||||||
Copyright © 2015 Ningbo ABC Fasteners Co.,Ltd All Rights Reserved Design by Hozest
NINGBO ABC FASTENERS CO., LTD
Website:www.abc-fasteners.com